Regency E33-LP User Manual

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC, Canada V4G 1H4918-408WARNING: Improper installation, adjustment, alteration

10 E33 FPI Direct Vent Gas InsertTop Bracket5) Place the top bracket onto the top edge of the top panel (refer to Diagram 2).Diagram 26) Slide the

11E33 FPI Direct Vent Gas InsertINSTALLATION 5) Re-install the grate (reverse step 3).6) Line up the pin holes (located at the bottom of log 03-23)

12 E33 FPI Direct Vent Gas InsertINSTALLATION Final Installation03-19E33 CONVERSION KIT FROM NG TO LPGTHIS CONVERSION MUST BE DONE BY A QUALIFIED GAS

13E33 FPI Direct Vent Gas InsertDiagram 4INSTALLATION 9) Attach the trim to the faceplate by using the plated screws (refer to Diagram 4).Rear View:

14 E33 FPI Direct Vent Gas InsertINSTALLATION Diagram 511) Push the FPI logo plate into the two holes in the bottom left corner of the faceplate.The s

15E33 FPI Direct Vent Gas Insert1) Align the left side Faceplate Trim Bracket with the Firebox Flange and secure using 2 screws as shown in diagram 1

16 E33 FPI Direct Vent Gas InsertINSTALLATION 1) Remove the rivets from the surround by pulling off the hoseclamp (located at the backside of surroun

17E33 FPI Direct Vent Gas InsertWIRING DIAGRAMINSTALLATION This heater does not require a 120V A.C. supply for operation. However, a 120V A.C. power

18 E33 FPI Direct Vent Gas InsertOPERATING INSTRUCTIONS2) Turn gas control knob so indicator points to "OFF" position and allow 5 minutes f

19E33 FPI Direct Vent Gas InsertOPERATING INSTRUCTIONSCOPY OF LIGHTING INSTRUCTION PLATEAUTOMATIC CONVECTION FAN OPERATIONThe fan operates automatica

2 E33 FPI Direct Vent Gas InsertFPI GAS FIREPLACE INSERTTO THE NEW OWNERCongratulations! You are the owner of a state-of-the-art Gas Insert by FPI.Th

20 E33 FPI Direct Vent Gas InsertMAINTENANCEGENERAL VENT MAINTENANCEConduct an inspection of the venting system semi-annually. Recommended areas to in

21E33 FPI Direct Vent Gas InsertMAINTENANCEFAN MAINTENANCEIf your fan requires maintenance or replace-ment, access to the fan is through the plate on

22 E33 FPI Direct Vent Gas InsertMAINTENANCE11) Disconnect the inlet gas line.12) Unplug the black and red wires at the valve. Undo the 2 TP wires at

23E33 FPI Direct Vent Gas InsertPARTS LISTMAIN ASSEMBLY Part # Description 1) 340-038 Fan Access Plate2) 340-

24 E33 FPI Direct Vent Gas InsertPARTS LISTBURNER & LOG ASSEMBLY Part # Description

25E33 FPI Direct Vent Gas Insert838485868788888888899090FULL SCREEN FRONT INSTALLATION Part # Description

26 E33 FPI Direct Vent Gas InsertPARTS LISTFACEPLATES, TRIMS AND HEARTHS Part # Description

27E33 FPI Direct Vent Gas InsertNOTES

28 E33 FPI Direct Vent Gas InsertNOTES

29E33 FPI Direct Vent Gas InsertNOTES

3E33 FPI Direct Vent Gas InsertTABLE OF CONTENTSFPI GAS FIREPLACE INSERTOPERATING INSTRUCTIONSFirst Fire ...

30 E33 FPI Direct Vent Gas Insert

31E33 FPI Direct Vent Gas InsertWARRANTYFPI Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality

32 E33 FPI Direct Vent Gas InsertInstaller: Please complete the following informationDealer Name & Address: ______________________________________

4 E33 FPI Direct Vent Gas InsertSAFETY LABELThis is a copy of the labels that accompany each E33 Gas Insert. We have printed a copy of the contents he

5E33 FPI Direct Vent Gas InsertIMPORTANT: SAVE THESE INSTRUCTIONSThe FPI Gas Fireplace must be installed in accordance with these instructions. Care

6 E33 FPI Direct Vent Gas Insert14) Install optional Excalibur Surround. See page 15.15) Install optional remote control or wall ther-mostat, pages 17

7E33 FPI Direct Vent Gas InsertMINIMUM CLEARANCES TO COMBUSTIBLES From Unit Side Walls * A 8" (203 mm) Ceiling B

8 E33 FPI Direct Vent Gas InsertVENTINGTHE APPLIANCE MUST NOT BE CONNECTED TO A CHIMNEY FLUE SERVING A SEPARATE SOLID FUELBURNING APPLIANCE.This appli

9E33 FPI Direct Vent Gas InsertOPTIONAL BRICK PANELOptional Brick Panel Set:Part # Description Qty Top (brick) panel 1 Back (brick) pan