Regency ANDROS AD Owner's Manual

• ANDROS (AD) •• CEILING FAN OWNER'S MANUAL • WARNING: Read and follow these instructions carefully and be mindful of all warnings shown througho

INSTALLATION THE MONTING PLATE1. Remove one of the three screws on the mounting hub located on the fan motor.2. Loosen the other two screws.3. Install

INSTALLING THE LIGHT KITNOTE:NOTE: Be sure the power is off before installing.1. Raise and hold the light kit close to the light plate and proceed to

OPERATING YOUR TRANSMITTERRestore power to ceiling fan and test for proper operation.Install 9 Volt battery (included). To prevent damage to transmitt

INSTALLING THE TRANSMITTER HOLDER1. Remove the cover from the holder. 2. Attach the holder with the two screws provided.12HolderScrewsFig. 3 Fig. 4Spe

CARE AND CLEANINGPeriodically it may be necessary to re-tighten blade to blade arm screws or blade arm to motor screws to prevent clicking or humming

GENERAL INSTALLATION & OPERATION INSTRUCTIONSIMPORTANT SAFEGUARDS:1. To ensure the success of the installation, be sure to read the instruction

IMPORTANT SAFETY PRECAUTIONS2Thank you for choosing a Regency Ceiling Fan. You have chosen the best!Your new ceiling fan has been designed to provide

UNPACKING YOUR FAN1. Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever necessary, the fan s

PREPARATIONPREPARATION:Verify you have all parts before beginning the installation. Check foam insert closely for missing parts. Remove motor from pac

INSTALLING THE FAN1. Carefully support fan body (motor) in its styrofoam packing with the mounting collar (where the wires come out) facing upward.2.

ELECTRICAL CONNECTIONS6WARNING:WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring.Multi

ELECTRICAL CONNECTIONS7Step 3. (Fig. 3) Receiver to House Supply Wires Electrical Connections: Connect the black (hot) wire from the ceiling to the b

FINISHING THE INSTALLATIONStep 1. Tuck connections neatly into ceiling outlet box.Step 2. Slide the canopy up to mounting bracket and place the key ho