Regency Horizon HZ54E Large Gas Fireplace User Manual

WARNING: If the information in these instructions are not followed exactly, a fi re or explosion may result causing property damage, personal injury

10Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONCaution RequirementsThe top, back and sides of the fi replace are defi ned by standoffs. The metal en

Regency Horizon HZ54E-1 Gas Fireplace11INSTALLATIONIf fi nishing the wall above the unit with paint -the non-combustible board (shipped separatelyfrom

12Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONMANTEL CLEARANCESDue to the extreme heat this fi replace emits, the mantel clearances are critical.

Regency Horizon HZ54E-1 Gas Fireplace13INSTALLATION6) Determine the total thickness of facing material (eg. hardiboard + ceramic tile) to ensure the

14Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONABCDEFGHIJKLNon-CombustibleFacingMetal Stud (Header)on edgeMetal Stud(Header)on edge(Located on the

Regency Horizon HZ54E-1 Gas Fireplace15INSTALLATIONNAILING STRIPSThe nailing strips come attached to the unit. There is 1 plate on each side,1 on the

16Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONVent restriction is required for certain venting installations, see the diagrams in the "Venti

Regency Horizon HZ54E-1 Gas Fireplace17INSTALLATIONEXTERIOR VENT TERMINATION REQUIREMENTSMinimum Clearance RequirementsCanada1USA2AClearance above gra

18Regency Horizon HZ54E-1 Gas FireplaceINSTALLATION8” dia.Flue pipe5” dia. flue pipespring spacerTermination CapAstroCap XLTM(Part #946-623/P)Vent Gua

Regency Horizon HZ54E-1 Gas Fireplace19INSTALLATIONRIGID PIPE VENTING SYSTEMSBASIC HORIZONTAL & VERTICAL TERMINATIONSRigid Pipe Vent Systems offer

2Regency Horizon HZ54E-1 Gas Fireplace2To the New Owner:Congratulations! You are the owner of a state-of-the-art Gas Fireplace by REGENCY®. The HZ54E

20Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONAdjustable Length 3”-10”-Galvanized N/A N/A 5DAL TC-5DLTAdjustable Length 3”-10”-Black N/A N/A 5DAL

Regency Horizon HZ54E-1 Gas Fireplace21INSTALLATIONDescriptionSimpsonDirect Vent Pro®SelkirkDirect Temp™Metal-Fab™Sure SealICC Excel DirectAttic Insul

22Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONVENTING ARRANGEMENTS ALLOWABLE HORIZONTAL TERMINA-TIONS FOR HZ54E-NGThe diagram shows all allowable

Regency Horizon HZ54E-1 Gas Fireplace23INSTALLATIONHH1VV1H1HVHorizontal Venting with Two (2) 90o ElbowsNG and LPHorizontal Venting with Three (3) 90o

24Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONVertical Venting with Three (3) 90o ElbowsNG and LP Option V H + H1 V + V1 A) 2&ap

Regency Horizon HZ54E-1 Gas Fireplace25INSTALLATION• Vent must be supported at offsets.• Firestops are required at each fl oor level and whenever p

26Regency Horizon HZ54E-1 Gas FireplaceINSTALLATION• Vent must be supported at offsets.• Firestops are required at each fl oor level and whenever p

Regency Horizon HZ54E-1 Gas Fireplace27INSTALLATIONDiagram 7Diagram 57) Ensure that the pipe clearances to combustible materials are maintained (Dia

28Regency Horizon HZ54E-1 Gas FireplaceINSTALLATION6) Continue to assemble pipe lengths.Note: If an offset is necessary in the attic to avoid obstru

Regency Horizon HZ54E-1 Gas Fireplace29INSTALLATION4) Separate the 2 halves of the wall thimble and securely fasten the one with the tabs to the outs

Regency Horizon HZ54E-1 Gas Fireplace3This appliance can only be used with the type of gas indicated on the rating plate. This appliance is not conver

30Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONGAS PIPE PRESSURE TESTINGThe appliance must be isolated from the gas sup-ply piping system by closi

Regency Horizon HZ54E-1 Gas Fireplace31INSTALLATIONVALVE COVER REMOVALThe valve cover will need to be removed to access the valve tray (see valve tray

32Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONAERATION ADJUSTMENTThe burner aeration is factory set but may need adjusting due to either the loca

Regency Horizon HZ54E-1 Gas Fireplace33INSTALLATIONAn optional AC power adaptor may be installed as a constant power source for the SureFire system.

34Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONPROFLAME SYSTEM GTMF WITH OPTIONAL FANGroundGreenNeutralLiveBlack BlackBlackFan Thermodisc(normally

Regency Horizon HZ54E-1 Gas Fireplace35INSTALLATIONNOTE: Wiring schematics for HZ54E (120 Volts),plug-in fan circuit with speed control switch on wall

36Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONWALL SWITCH (Included with Unit)1) Run the supplied 10' of wire through

Regency Horizon HZ54E-1 Gas Fireplace37INSTALLATION584 Proflame GT Series Feature Sheet (X) Indicates Included FeatureNote 1 ~ Profl ame Flame Modulato

38Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONBATTERY & ON | OFF SWITCH INSTALLATION DFBC = digital fi replace burner control1) Remove glass

Regency Horizon HZ54E-1 Gas Fireplace39INSTALLATIONDFBC = digital fi replace burner control1) Remove glass door to access to DFBC & battery pack t

4Regency Horizon HZ54E-1 Gas FireplaceTABLE OF CONTENTSSAFETY LABEL Copy of Safety Decal ...5REQUIRE

40Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONNote: DO NOT USE 4 AA batteries in the battery pack on the tray - the DFBC is now powered by the

Regency Horizon HZ54E-1 Gas Fireplace41INSTALLATION12) Program Receiver and transmitter (refer to manual)Note: DO NOT USE 4 AA batteries in the batte

42Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONGTMF REMOTE INSTALLATIONDFBC = digital fi replace burner control1) Remove the faceplate and glass d

Regency Horizon HZ54E-1 Gas Fireplace43INSTALLATION14) Install the fan control module onto the velcro pad located on the fl oor the unit located left

44Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONOPTIONAL REFLECTIVE PANEL INSTALLATION1) Position the left side panel in place - top of panel in fi

Regency Horizon HZ54E-1 Gas Fireplace45INSTALLATIONGLASS CRYSTALS OR OPTIONAL STONESINSTALLATION ON BURNERIMPORTANT NOTE:Only the supplied approved Gl

46Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONGlass Crystals shown on BurnerFor Units HZ54E, , HZ42ST, HZ42STE, HZI234E, HZ42E, HZ42, HZ30E,HZO42

Regency Horizon HZ54E-1 Gas Fireplace47INSTALLATIONRead the instructions below carefully and refer to the images. If the logs are broken do not use th

48Regency Horizon HZ54E-1 Gas FireplaceINSTALLATION10. Position Left Log (2) by matching the log and template profi les exactly.11. Position Right Log

Regency Horizon HZ54E-1 Gas Fireplace49INSTALLATIONInstallation of Refl ective Panels must be completed before installing the log set.Read the instruct

Regency Horizon HZ54E-1 Gas Fireplace5SAFETY LABELThis is a copy of the label that accompanies each HZ54E-NG and HZ54E-LP Direct Vent Gas Fireplace. W

50Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONDiagram 54) Install the glass crystals (see glass crystal installation section in this manual).Pi

Regency Horizon HZ54E-1 Gas Fireplace51INSTALLATION8) Place logs C + D on logs A + B, as shown in diagram 10. Note: Logs should be oriented exactly

52Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONFACEPLATE &DOOR FRAME OVERLAY INSTALLATION1) Install the door frame overlay by hooking the top

Regency Horizon HZ54E-1 Gas Fireplace53INSTALLATIONCompleted Faceplate & Door Frame Overlay InstallationIMPORTANT NOTETo ensure the gap between th

54Regency Horizon HZ54E-1 Gas FireplaceINSTALLATIONOPTIONAL FAN INSTALLATIONAerial View of the inside of the unit shown.Steps 6 & 7 for NG units o

Regency Horizon HZ54E-1 Gas Fireplace55INSTALLATION14) Secure the fan to the fl oor of the unit with 2 screws. *See wiring diagram in manual.15) Atta

56Regency Horizon HZ54E-1 Gas FireplaceINSTALLATION21) Attach the receiver to the unit with the velcro strip. Place the receiver in front of the grou

Regency Horizon HZ54E-1 Gas Fireplace5757INSTALLATIONOPERATING INSTRUCTIONSOPERATING INSTRUCTIONS1) Read and understand these instructions before ope

58Regency Horizon HZ54E-1 Gas Fireplace58OPERATING INSTRUCTIONSCOPY OF LIGHTING PLATE INSTRUCTIONS918-628bA) This appliance is equipped with an igni

Regency Horizon HZ54E-1 Gas Fireplace59MAINTENANCEMAINTENANCE INSTRUCTIONS1) Always turn off the gas valve before cleaning. For relighting, refer to

6Regency Horizon HZ54E-1 Gas FireplaceREQUIREMENTS5.08: Modifications to NFPA-54, Chapter 10(2) Revise 10.8.3 by adding the following additional requi

60Regency Horizon HZ54E-1 Gas FireplaceMAINTENANCE1) Turn the unit off and allow it to cool down to room temperature.2) Turn off the gas supply to t

Regency Horizon HZ54E-1 Gas Fireplace61MAINTENANCE1) Turn the unit off and allow it to cool down to room temperature.2) Turn off the gas supply to t

62Regency Horizon HZ54E-1 Gas FireplaceMAINTENANCE1) Remove the burner tray by undoing the 2 screws in between the bot-tom cover and burner on the fi

Regency Horizon HZ54E-1 Gas Fireplace63MAINTENANCEHZ54E-LP UNIT1) Loosen 6 screws that secure the burner extenders. on burner tray, located behin

64Regency Horizon HZ54E-1 Gas FireplacePARTS LISTMAIN ASSEMBLY23461578HEAT WAVE DUCT KITHEAT RELEASE DUCT KIT Part # Description

Regency Horizon HZ54E-1 Gas Fireplace65PARTS LISTACCESSORIES3031 Part # Description 30) 476-908 Black Enamel In

66Regency Horizon HZ54E-1 Gas FireplaceNOTES

Regency Horizon HZ54E-1 Gas Fireplace67WARRANTYRegency® Fireplace Products are designed with reliability and simplicity in mind. In addition, our inte

Printed in CanadaRegency Horizon and SureFire™ are trademarks of FPI Fireplace Products International Ltd.© Copyright 2013, FPI Fireplace Products Int

Regency Horizon HZ54E-1 Gas Fireplace7DIMENSIONS59” (1499mm)52-5/8” (1337mm)48-1/2” (1232mm)20-1/2” (521mm)19-3/4” (502mm)10-5/8”(270mm)1-1/2”(38mm)31

8Regency Horizon HZ54E-1 Gas FireplaceINSTALLATION10) Be aware of electrical wiring locations in walls and ceilings when cutting holes for termination

Regency Horizon HZ54E-1 Gas Fireplace9INSTALLATIONThis includes:1) Clocking the appliance to ensure the correct fi ring rate (rate noted on label 41,5