Regency FireGenie User Manual

North American VersionREMOTE CONTROLINSTALLATION & OPERATING INSTRUCTIONS© Copyright 2007, FPI Fireplace Products International Ltd. All rights re

FPI FireGenieTM Remote Control Manual10Time Zone 1 On-Time Programming of Time Zone 1 SETTING THE PROGRAM MODEThe user can program two On-Times and t

FPI FireGenieTM Remote Control Manual 11 Time Zone 1 Off-Time Programming of Time Zone 1 Time Zone 1 Set Temperature Programming of Time Zone 1 2)

FPI FireGenieTM Remote Control Manual12 Time Zone 2 Off-Time Programming of Time Zone 2 Time Zone 2 On-Time Programming of Time Zone 2 4) Programm

FPI FireGenieTM Remote Control Manual 13 Time Zone 2 Set Temperature Programming of Time Zone 2 6) Programming the Set Temperature of Time Period 2Pr

FPI FireGenieTM Remote Control Manual14The “Day”, “Set Temperature” and “Prog 2” will all begin to fl ash simultaneuosly, indicating that Copy Mode has

FPI FireGenieTM Remote Control Manual 15INSTALLING THE RECEIVER2. Connect the output cable of the Receiver to the valve. Refer to the u

FPI FireGenieTM Remote Control Manual165) Secure Heat Shield onto Receiver with 2 x #10 x 1/2” screws. Ensure the bottom of the Heat Shield is fl ush

FPI FireGenieTM Remote Control Manual 174) Remove Bottom Glass Trim.5) Place Remote Receiver under fi rebox. Remote ReceiverFirebox6) Place Heat Shield

FPI FireGenieTM Remote Control Manual18TROUBLESHOOTINGIf the Remote Control does not turn on:• Check to see that the Receiver is in the “Remote” posi

FPI FireGenieTM Remote Control Manual 19Displaying Temperature in Celsius or FahrenheitThe default setting of the Remote Control is to display the tem

The FireGenieTM Remote Control is tested safe when installed in accordance with this installation manual. It is your responsibility to read all instr

FPI FireGenieTM Remote Control Manual20NOTES:

FPI FireGenieTM Remote Control Manual 21NOTES:

FPI FireGenieTM Remote Control Manual22NOTES:

FPI FireGenieTM Remote Control Manual 23

FPI FireGenieTM Remote Control Manual24FireGenieTM is a trademark of FPI Fireplace Products International Ltd. Printed in CanadaIMPORTANT!The transmit

TABLE OF CONTENTSMatching Remote Control & Receiver ID Code ... 4Remote Control K

FPI FireGenieTM Remote Control Manual4The Remote Control handset has a set of unique ID codes that is pre-programmed into its memory. This set of ID c

FPI FireGenieTM Remote Control Manual 5The FireGenieTM is a custom designed Remote Control system with the following features: * Thermostatic Control

FPI FireGenieTM Remote Control Manual6REMOTE CONTROL SCREEN DISPLAY (LCD)The LCD provides the following display features: 1. Flame Indication; 2.

FPI FireGenieTM Remote Control Manual 7RECEIVER OPERATIONThe Remote Receiver has 3 operating modes, namely ON, OFF and Remote. The operating mode is s

FPI FireGenieTM Remote Control Manual8AUTO MODEThere is a 3-minute delay built into the Remote Control. This delay will affect the “AUTO” and “PROG” m

FPI FireGenieTM Remote Control Manual 9ADVANCED FUNCTION - PROGRAM MODENote: Ensure the Remote Control has been turned ON in order to operate in this